CD / MP3 & USB & SD OPERATION
GENERAL OPERATION
PLAY / PAUSE
Press to start playing CD / MP3 disc or USB or SD
Press again to stop playing CD / MP3 or USB or SD operation temporarily.
Press again to resume playback.
SKIP +
Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point of the sound.
STOP
Press to stop all CD / MP3 or USB or SD operation.
CD / MP3 PLAYBACK
1. Set the “FUNCTION” selector to “CD mode.
2. Open the CD door and place a CD / MP3 disc with the label up in the CD compartment,
3. Close the CD door.
4. Focus search is performed if disc is inside
For CD disc - Total number of tracks is read and appears on the display together with CD.
For MP3 disc - “MP3” on the display.
5. Playback will start automatically from the first track.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
8. Press the “STOP” button when finished.
PROGRAM
Up to 20 tracks of CD disk, 99 tracks of MP3 disc can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROG” button, the display will show “P01” and “PROG”.
2. Select desired track by using the “SKIP +” or “SKIP -” button.
3. Press the “PROG” button again to confirm desire d track into the program memory.
4. Repeat step 1 to 3 to enter additional tracks into the program memory.
5. When all the desired tracks have programmed. Press the “PLAY / PAUSE” button to play the disc
in the order you have programmed.
6. Press the “STOP” button twice to terminate programmed playback.
