6
SET VOLUME
1.
To change the volume, turn the volume control
[VOLUME - / +]
on the device.
2.
To change the microphone volume, turn the microphone volume control
[MIC
VOL]
on the device.
EQ
1.
This device has a built-in equalizer system.
2.
Press the [EQ] key repeatedly to select the different equalizers.
3.
The following equalizers are available.
FLAT / POP / CLASSIC / JAZZ / ROCK
MIC. ECHO SETTING
1.
Press and hold the
[ECHO]
button on the device to turn the microphone echo
effect ON / OFF.
Note:
The function can only be used when the microphone is connected.
SET LED EFFECT
1.
There are 5 LED color settings for the LED speaker lighting.
2.
Hold down the
[P-MODE / LIGHT]
key to select the LED lighting.
3.
Press the
[P-MODE / LIGHT]
key several times to switch through the different
color modes.
Mode 1: blue light.
Mode 2: red light.
Mode 3: Green light
Mode 4: 7 color change. The color change follows the music.
Mode 5: 7 color change. The color change is slow.
4.
After mode 5, press the
[P-MODE / LIGHT]
button again to switch off the LED
lighting.
