32
TURN ON AND TURN OFF
IMPORTANT: THE DEVICE HAS TWO SWITCHES ON: THE
PRIMARY (49) IS ON THE BACK OF THE DEVICE AND THE
SECONDARY (15) ON THE FRONT OF THE DEVICE.
To switch on the device, press the
POWER ON / OFF button (15)
on the
front for 1 second and set the volume to a low level. The
POWER LED
(17)
lights up.
Press the
MW / FM / CD / USB / TAPE / PHONO button
(12/14/26/30/31)
to select the desired function mode.
Start by adjusting the volume with the
VOLUME CONTROL (7)
.
To switch off the device, press and hold the
POWER ON / OFF button
(15)
for 3 seconds. The
POWER LED (17)
goes out.
VERY IMPORTANT: If there is no sound, the device switches off automatically
after 15 minutes.
Attention:
Disconnect the P
OWER CORD (29)
before opening the device. No user
maintainable
Parts inside the device. Contact qualified service personnel.
PHONO MODE
1.
Open the
PROTECTIVE COVER (1)
of the device.
2.
Screw the
TRANSPORT SCREW (50)
completely in with a small
screwdriver. Remove the pin protector from the
TONE ARM CLAMP (22)
.
NOTE:
Do not manually turn or stop the
TURNTABLE (36)
. It can cause damage.
Transport or vibrations without the
tonearm being secured with the TONE
ARM CLAMP (22)
could damage the
tonearm.
