20
SAVE RADIO TRANSMITTERS AS PRESET
1.
To save a
"FM / MW"
station as a preset, select a radio station to be
saved as a preset.
2.
Press and hold the
[M]
button for about 3 seconds.
3.
"P01"
flashes in the display.
4.
Use the
[
/
]
buttons to select the memory location.
5.
To save the station to the selected location, press the
[M]
key.
6.
Repeat steps
"1-5"
until the desired radio stations are saved as a preset.
Note:
If you have selected a storage space that is already occupied, it will be
replaced by the new sender.
A maximum of 20 FM stations and 20 MW stations can be stored.
SELECT PRESET TRANSMITTER
1.
To open the
"FM / MW"
preset list, press the
[M]
button.
2.
Press the
[
/
]
buttons to select the desired memory location.
3.
Press the
[M]
key again to close the list.
SET ALARM
1.
To set an alarm, the device must be in standby mode.
2.
There are always two alarms set.
3.
In standby mode, press and hold the
[Power]
button for about 3 seconds.
4.
The hour indicator starts to flash.
5.
Use the
[
/
]
buttons to set the hours.
6.
Press the
[Power]
key to confirm the selection.
7.
The minutes start to flash.
8.
Use the
[
/
]
buttons to set the minutes.
9.
Press the
[Power]
key to confirm the selection.
10.
Select the days when the alarm should sound.
1-7 = Daily, 6-7 = Saturday / Sunday, 1-5 Mon - Fri, 1 = Once
11.
Press the
[Power]
key to confirm the selection.
12.
Repeat steps
“1-10”
and set the wake-up time for the second alarm.
