User Manual for reflecta Motor Silverline screens
1. Please fix the screen on the ceiling or wall (see the sideway drifts on the
tubus). Please use an air lever to make sure that the screen will be horizontal
to avoid wrinkles.
2. Please fix the switch to the access cable (picture A) in order to move out and
move in the fabric.
3. The screen is adjusted by factory to stop automatically on the maximum
length.
4. By turning the upper adjusting screw to the right (clockwise direction) (picture
B) you can shorten the length; by turning to the left (anti clockwise) it is
possible to lengthen the screen.
Attention: By adjusting the end positions you will lose warranty.
5. By turning the lower adjusting screw to the right (clockwise direction) (picture
B) the screen moves up. Keep the switch to run in the screen turned on and
turn the screw slowly till the ending bar lies without pressure on the tubus.
Attention: Please be informed that this action can only used if the fabric
is not totally runned in. Please be aware that damages can appear if the
screen is runned in too far.
6. The screen has a high class and maintenance free tube motor with integrated
overheat control. The motor equates the VDE-guidelines.
7.
Please be informed that your guarantee gets lost if you change the
adjustment.
