Product Instructions
Bracket-Ford SD Dual Whl
Part Number:
308862
FOR INSTALLATION WITH
30886 Rail Kit
©
2019 Horizon Global America Inc.
308862N
04/03/2019
Rev. A
Page 2 of 5
1.
The Pickup bed must be removed to install this kit.
ASSEMBLY AND INSTALLATION
Pickup Bed Removal
1.
Remove the tailgate from the pickup bed.
1.
Open the tailgate.
2.
Detach tailgate tether cables on each side (with the helping hands of an assistant).
3.
Remove tailgate from pickup bed.
2.
Remove the rail kit trim rings (Figure 1).
3.
Remove fuel filler
1.
Remove fill cap(s).
2.
Remove filler tube retaining screws and position filler down and out of the bed.
4.
NOTE
: Diesel engine shown, gas engine similar (Figure 2).
5.
Disconnect the LH and RH wire harnesses located on the hitch behind the bumper (LH shown in figure 3).
6.
Remove Pickup bed mounting bolts.
1.
Use a 24EP TORX Plus Socket for removal.
7.
Remove pick up bed.
1.
Four people are recommended for this task.
•
NOTE
: DO NOT set pickup bed directly on the ground, Use Stands to support the bed similar
to how the bed is supported while installed on the truck.
FIGURE 1
FIGURE 2
FIGURE 3
