Reer Neo Digital, Instructions For Use Manual

Page: 22 / 104

Troubleshooting
The status LED does not light up

Make sure that both units are switched on.

Check the connection of the mains adapter to the wall power socket and the unit.

Exchange the batteries and/or check the polarity.
The status LED flashes orange

The parent unit receives sounds. Turn up the volume on the parent unit to make sure
that you hear the sounds from your baby.
The status LED flashes red

Long flashing: Batteries are flat. Replace the batteries or connect the unit to the power
supply.

Short flashing: maximum range is exceeded. Reduce the distance between the baby and
parent unit.
No sound transmission despite established connection

The volume is set too low. Turn the volume control on the parent unit up.

The microphone sensitivity is set too low. Turn the microphone sensitivity control on the
baby unit up.
22