7
Place the quadrocopter on a level surface.
Move the joystick for the pitch function to
the lowest setting and switch the transmit-
ter on with the on/off switch. Then push the
joystick all the way forward and then slowly
backward again to switch the transmitter
into operating mode. The transmitter emits
a single signal sound to confirm binding is
complete, and the LED remains lit.
Li-Po
3.7V 730mAh
Remove the flight vehicle battery safely
at the conclusion of the flight. This
should become a post-flight habit to
guard against unforeseeable problems.
Warning: If left connected in the flight
vehicle for a long time, the battery may be
damaged due to over-discharge, or even
become a fire hazard.
Turn off the transmitter. If transmitter
is not to be used for a long duration,
please remove the battery for storage.
Warning: If the AA batteries are left
in the transmitter, potential leakage
could occur which may damage the
transmitter, and create fire hazards.
If transmitter is not to be
used for a long time, please
remove the battery for
storage.
BINDING OF RADIO TRANSMITTER AND RECEIVER
Step1
Step2
Step3
Step4
Li-Po
3.7V 730mAh
Push the throttle stick
to the lowest position
CAUTION
