23
4
Resetting the gyroscope
If you cannot operate the drone after pairing, or if the drone appears to be
unbalanced in flight, press the finger button (4) to reset the gyroscope. The
LED lights will briefly flash rapidly before staying constant to indicate that the
gyroscope has been reset.
Important!
Read the following information carefully before flying the drone.
c) Basic information on controlling drones
Before flying the drone, familiarise yourself with the control functions to ensure that you can control the drone safely.
The drone is controlled by the remote control and responds to hand gestures.
1
How to wear the remote control
Slide your thumb though the thumb hole on the strap. Place the remote control
around the base of your hand, just above the wrist. Fasten the wrist strap,
ensuring that the remote control is firmly in place. Put your index finger through
the finger strap with the button positioned on the side of the finger, next to your
thumb.
2
Altitude and auto hover functions
The altitude function enables you to control the altitude of the drone. The auto hover function holds the drone at a
specific altitude.
To change the altitude, press and hold the finger button (4) and raise your hand up or down to an angle of 15 degrees
or more to move the drone upwards or downwards.
15°
15°
Release the finger button (4) to stabilise and hover the drone at the current height.
We recommend flying the drone no higher than 10 metres.