manualshive.com logo in svg

Reely 2142121, Operating Instructions Manual

Share
Download
Reely 2142121 Operating Instructions Manual Download Page 34

34

27. Technical data

a) Transmitter

Frequency band ....................................2.450 – 2.478 GHz
Transmission power..............................6 dBm
Number of channels .............................4
Transmission range ..............................approx. 40 m
Operating voltage .................................3 V/DC via 2x AAA/micro batteries 
Dimensions (W x H x D) .......................119 x 75 x 50 mm
Weight without batteries .......................74 g

b) Quadrocopter

Power supply ........................................3.7 V/300 mAh (1S LiPo)
Charging time .......................................approx. 50 – 60 minutes
Dimensions (L x W x H) ........................

141 x 96 x 52 mm (skater mode including the pilot figure)

Rotor shaft spacing ...............................85 mm (diagonal)
Propeller diameter ................................41 mm
Flight time .............................................approx. 6 minutes
Take-off weight .....................................36 g (incl. rechargeable battery)

Summary of Contents for 2142121





































Reviews:

No comments

Brands by name

Popular brands

Load more brands