Control
Panel System Example
Control Switch
esting Procedure
Testing procedure must be done before dismantling or moving the scaffolding or any
heavy equipment used for lifter installation purposes.
1. Are lifter functions DOWN-STOP-UP working properly?
YES
NO
................................................................................................................................
2. Does the light come ON when lower contact cover is up and connected to
the lifter in the normal operating position?
YES
NO
................................................................................................................................
3. Can the light fitted be turned ON and OFF by remote control?
YES
NO
4. Make sure installation layout sheet page 16, has been filled out with all
information regarding lifters. It is a good idea to mark north and south
on the sheet to understand location of lifters.
15
