INSTALLATION
1.Put the cleaner onto the collection cup, check the silicon’s position by adjust the 3
screw at the edge of cover; make both sides of the silicon could contact the inner
tube of collection cup.
2.Plug transformer into a timer and set the timer to make the cleaner work every 15
minutes every 2 hours.
3.Adjust the foam in the chamber of your protein skimmer to a proper level.
MAINTENANCE
The neck cleaner should be clean at last once a month; it will help skimmers take
a high efficiency.
The neck cleaner has a simple assembly structure which could be easily isassembled
by hands, what you need to do is twisting off a few screws.
TO CLEAN THE CLEANER
1.Move the cleaner off of collection cup; disassemble the cleaner to three parts like
(Fig.1) shows.
2.Using a wet rag clean the organics on those parts.
3.Assemble them;
4.Adjust the position of cleaner on the collection cup.
5.Adjust the foam in the chamber of your protein skimmer to a proper level.
SAFETY
●The socket for the transformer and possibly a timer must be located away from
moisture or water
．
●When taking adjustment or cleaning maintenance, make sure the transformer was
removed from socket.
●Be careful, don’t drop the cleaner into water, the motor will be broken down.
Technical data
Voltage:
Power consumption: ≤ 15 Watt
Life time:1500h (for motor)
WARRANTY
●Reef Octopus acrylic products come with a ONE (1) YEAR Limited Warranty from
the date of the retail purchase by the original end-user.
●If a material or workmanship defect arises and a valid claim is received within the
Warranty Period, Reef Octopus will replace the case only.
●Reef Octopus cannot be held liable for damages to personal property due to misuse
or improper care and maintenance of case and o-ring seals.
●Reef Octopus warranty does not, under any circumstance; cover the replacement or
cost of any electronic device or personal property inside or outside of the case.
Summary of Contents for Neck Cleaner-110
Page 3: ......
