Level sensor device manual
11/12
Remember that the device is not entirely watertight and it must not be submerged in
the liquid below the blue line. Otherwise, it can be permanently damaged.
7. Resetting the device
If your device does not work properly, or you want to repeat the setup procedure, or you
cannot connect to it despite several attempts, you may restore it to its default settings by
placing a magnet (included in the package) on the top part of its housing (above the name
Level sensor
).
Tip: move the magnet from the left to the right side of the device, to make it possible for the
device to detect its presence. The device will indicate the beginning of the resetting process
by emitting three sound signals and next one short sound.
8. Connect to your Internet network via a computer or a mobile device. Next, go to
Smart Reef
account. Check, if your device has
been properly added to the list of your devices. You can change its name and assign it to
one of your aquariums. The serial number of your device and its firmware version are
displayed in the lower right corner of the screen. Our devices are SMART; therefore, we
constantly improve them. From time to time, you will receive information about firmware
updates that will make your device work even better.
