Ecotech Radion G5, AI Hydra and Kessil Mount systems
*
The X Series system cannot be used with Flex Arm Mounts
*Due to the weight of the X Series Dual, it is especially important to carefully
check the specifications for the mount system you intend to use to ensure that
your mount and tank can support the additional weight of the X Series system.
If unsure about the mounting and or attachment of the system, we recommend
contacting a licensed professional to avoid serious personal injury or property damage.
Reef Brite will not be responsible for any damages that may result from
improperly installed or mounted X Series systems.
If unsure about the compatibility or installation of your
G5, AI Hydra and Kessil unit
,
For faster service please provide your phone number and a good time to call.
Radion XR series
locate the four
Silver flathead
M5 x .8mm thread x 12mm long
mounting screws included with your X Series kit.
AI Hydra
units locate the two
Silver flathead M5 x .8mm thread x 25mm long
screws
that came with X Series kit (It will be necessary to remove the included Black nylon
spacers).
Attach two of the light brackets (Per fixture) that came with your X Series system by
installing them
under
the Multi Light or Double Arm rail mount you are using for
your
XR
or
Hydra
series light so that the holes align with the threaded holes on your
fixture.
I
t is
highly
recommended to carefully thread the screws by hand to ensure that the
screws are not cross threaded and avoid over tightening.
Do not attempt to use hardware not supplied with your X Series system as
damage to your fixture could result.
