reedinstruments
www
com
Warnings
•. Set.function.switch.to.the.appropriate.position.before.measuring.
•. When.measuring.volts.do.not.switch.to.current/resistance.modes.
•. When.changing.ranges.using.the.selector.switch.always.disconnect.the.
test.leads.from.the.circuit.under.test.
•. Do.not.exceed.the.maximum.rated.input.limits.
Cautions
•. Improper.use.of.this.meter.can.cause.damage,.shock,.injury.or.death..
Read.and.understand.this.user.manual.before.operating.the.meter.
•. Always.remove.the.test.leads.before.replacing.the.battery.
•. Inspect.the.condition.of.the.test.leads.and.the.meter.itself.for.any.damage.
before.operating.the.meter..Repair.or.replace.any.damage.before.use.
•. Use.great.care.when.making.measurements.if.the.voltages.are.greater.than.
25VAC.rms.or.35VDC..These.voltages.are.considered.a.shock.hazard.
•. Remove.the.battery.if.the.meter.is.to.be.stored.for.long.periods.
•. Always.discharge.capacitors.and.remove.power.from.the.device.under.
test.before.performing.Diode,.Resistance.or.Continuity.tests.
• Voltage checks on electrical outlets can be difficult and misleading
because.of.the.uncertainty.of.connection.to.the.recessed.electrical.
contacts..Other.means.should.be.used.to.ensure.that.the.terminals.are.
not.“live”.
• If the equipment is used in a manner not specified by the manufacturer,
the.protection.provided.by.the.equipment.may.be.impaired.
Input Limits
Function
Maximum Input
A.AC,.A.DC
600A
V.DC,.V.AC
600V.DC/AC
Resistance,.Capacitance,.Diode.Test
250V.DC/AC
Temperature
60V.DC,.24V.AC