reedinstruments
www
com
4. INDICATOR
1 — Digital readout
2 — Temperature °C (Celsius)
3 — Temperature °F (Fahrenheit)
4 — Measuring indication
5 — Data Hold
6 — LOW battery indicator
7 — Laser Point
8 — Fixed emissivity (0.95)
5. MEASURMENT OPERATION
1 — Hold the meter by its Handle Grip and point it toward the surface to
be measured.
2 — Squeeze and hold the Trigger to turn the meter on and begin testing.
The display will light if the battery is still good. Replace the battery if
the display does not light up.
3 — While measuring, the SCAN display icon will appear in the upper left
hand corner of the LCD.
4 — While continuing to squeeze the Trigger:
a. Push the Laser button to turn on the laser pointer. When the laser
is on the laser icon will appear on the LCD over the temperature.
Aim the red beam approximately a half inch above the point of
test (pressing the Laser button again turns the laser off).
b. Select the temperature units (°C or °F) using the °C & °F buttons.
c. Push the Backlight key to turn on the LCD backlighting function.
5 — Release the Trigger and the HOLD display icon will appear on the
LCD indicating that the reading is being held.
6 — The meter will automatically power down after approximately
7 seconds after the trigger is released.
