REED R8801 Instruction Manual Download Page 6

reedinstruments

www

com

6

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black

Rich Black - 

20/20/20/100

Blue -  100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue -  100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue -  100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

Analog Converter

1.  Turn the meter on by pressing and holding the Power button.
2.  Press the mA button. The mA Icon will appear on the LCD.
3.  Press the left or right directional buttons to adjust the position 

of the Digit Select Indicators. Press the up and down buttons to 
adjust the output value.

4.  Insert a Test Lead into the Negative mA Terminal and a Test Lead 

into the Negative V Terminal. Connect the test leads to the loading 
device. The nominal input voltage is 12 to 28V.

Ramp Function

Use the Ramp function to change the output voltage or current in regular 
increasing or decreasing values.

1.  Turn the meter on by pressing and holding the Power button.
2.  Press the RAMP SET button. The Ramp Status Icons will appear 

on the LCD.

3.  Press the Voltage button to select Voltage Ramp Set Mode,  

indicated by a “V” on the display. Press the mA button to select 
Current Ramp Set Mode, indicated by a “mA” on the display.

4.  Press the left directional button to select a cyclical pattern, which 

will be indicated by “L0” on the LCD. Press the right directional 
button to deselect the cyclical pattern.

5.  Press the up and down buttons to select the ramp range. 
6.  Press the RAMP button to select the ramp pattern.  

The corresponding icon will appear on the LCD: 
 
 

7.  Insert a Red and Black Test lead into the corresponding terminals 

based on the output (Voltage: V Terminals, Current: mA Terminals).

8.  Press the up button to start the Ramp Function. Press the down 

button to pause the Ramp Function. While Paused, press the up 
and down buttons to increase and decrease the output.

Slow

  

(1 sec/value):

Quick

  

(0.5 sec/value):

Step

  

(5 sec/value):

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for R8801









Reviews: