reedinstruments
www
com
13
INSTRUMENTS
INSTRUMENTS
Battery Replacement
1) When the battery voltage drops below the proper operation range the
symbol will appear on the LCD display, indicating that the battery
needs to be changed.
2) Before changing the battery, switch the main function to "OFF" and
disconnect the test leads.
3) Open the back cover using a screwdriver.
4) Replace the old battery with a new 9V battery.
5) Close the back cover and fasten the screws using a screwdriver.
Product Maintenance
WARNING!
Before opening the meter, disconnect both test leads and never use
the meter before the cover has been reinstalled and fastened.
To avoid contamination or static damage, do not touch the circuit
board without proper static protection.
Notes:
• If the meter is not going to be used for a long time, take out the battery and
do not store the meter in high temperature or high humidity environment.
• When taking current measurements, keep the cable at the center of the
clamp to yield a more accurate test result.
• Repairs or servicing not covered in this manual should be performed
only by qualified personal.
• To clean the meter, periodically wipe the case with a dry cloth. Do not
use abrasives or solvents on these instruments.
For service on this or any other REED product or information on other
REED products, contact REED Instruments at [email protected].
www.
GlobalTestSupply
.com
Find Quality Products Online at: