REED R3002 Instruction Manual Download Page 7

reedinstruments

www

com

7

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black

Rich Black - 

20/20/20/100

Blue -  100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue -  100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue -  100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

Error Codes

If the meter fails its internal diagnostic test all button functions will cease 
and an error message will appear on the display.

1.  Err1: Pressure value is over the range.
2.  Err2: Pressure value is below the range.
3.  Err3: DIF function, the differential pressure value is over range.
4.  Err4: DIF function, the differential pressure value is below range.

Battery Replacement

When the battery power falls low, “BAT” will appear on the display screen. 
Immediately replace the 9V battery.

1.  Turn unit off
2.  Carefully open battery compartment at the back of the instrument
3.  Remove old battery
4.  Replace with new battery observing the correct polarity
5.  Close battery compartment

Notes   _________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Summary of Contents for R3002









Reviews: