reedinstruments
www
com
3
Safety
The following warnings must be followed to avoid injury.
• DO NOT remove warning labels
• DO NOT use optical tools such as a transit to view laser beam as
serious eye injury could result
• DO NOT project the laser beam directly into the eyes of others
• DO NOT stare directly at the laser beam
• DO NOT project laser beam onto a reflective surface
• DO NOT operate around children, or allow children to operate
• DO NOT disassemble the laser
• Always turn off the laser when this tool is not in use
IMPORTANT
Read all instructions prior to operating the unit and DO NOT remove any
labels from the tool. The unit produces a straight line on the same surface
on which the tool is placed. Any reflection of the line on another surface
should be considered reference. You should always use caution when
nailing, cutting or drilling in walls, ceilings and floors that may contain
wiring or pipes near the surface.
CAUTION
Shielded, dead or non-powered wiring will not be detected as live wires.
Always remember that studs or joists are normally spaced 16 inches or 24
inches apart and are 1-1/2 inches in width. To avoid surprises, be aware
that anything closer together or of a different width may be an additional a
stud, joist or firebreak.
When working near AC electrical wires, always turn off the power.
Note
The unit is designed to detect 110 volts (for USA version) and 230 volts
for (European version) AC in live electrical wires. It will also detect the
presence of live wires having greater than 230 volts.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
