REED 5A, User Manual, Page: 7 / 11

Figure 14
e) Set tonearm body [6] on the base [10].
Fixing screw [6b] must match with the
groove [10a] in tonearm base. Fix the
screw [6b] with hex (allen) key (Figure
14).
Figure 15
Figure 16
f) Fix the screw [6c] on the other side of
tonearm body [6] with hex (allen) key
[4] (Figure 15).
g) Attach a cartridge of your choice to the
headshell. Check cartridge position with
Reed protractor [1] (Figure 1) after Step
3, Step 4, Step 5 and Step 6.
h) Put counterweight frame [3] onto the
holder [7a] and fasten it with the fixing
screw [3a] (Figure 16).
WARNING!
Before using your tonearm (making
adjustments or playing LPs) make sure
that all bearings of front link and back link
vertical and horizontal axis are in correct
position (Figure 5, 6, 9, 11).
Failing to set bearings and pivots
correctly may permanently damage
the cartridge, tonearm and LP.
Be careful while connecting or
disconnecting wire connectors to the
cartridge, because tonearm wiring is
very fragile. For connecting and
disconnecting wires, use tweezers.
Always pull the wire by its connector
and never pull by wire itself.
11
12