17
3.5mm Terminal to RS-232 Serial Connection
RS-232
Mono Jack
Pin 2 (RX)
Pin 4 (DTX)
Sleeve
Tip
Battery Replacement
When the low battery icon
appears on the LCD, the batteries must
be replaced.
1. Remove the two (2) Phillips screws on the back of the meter directly
located above the top of the kickstand.
2. Remove the battery cover.
3. Replace 6 x 1.5V "AA" batteries.
4. Secure the battery cover with the two (2) Phillips screws.
Applications
• Preventative Maintenance
• Industrial Machinery/Equipment
• Construction Sites
• Ensuring Safe Working Conditions
• Public Venues/Concerts
• Code Enforcement
• Traffic
• Appliance Noise Testing
• Long-term Measurement
• Recording of Acoustic Levels for Environmental Impact Studies
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com