10
Continuity Measurement
1.
Set the function dial to the
position.
2.
Press the
SELECT
button to select continuity
as indicated by on the LCD display.
3.
Measure the continuity by touching the
test probe tips to the load in parallel.
4.
Note the measured value.
If the measured resistance is >1000Ω, circuit is open. If the
measured resistance ≤10Ω, the audible buzzer will sound.
Non-Contact AC Voltage Measurements
WARNING:
Risk of electrocution. Before use, always test the
Voltage Detector on a known live circuit to verify proper operation.
1.
Set the function dial to any position.
2.
Place the tip of the meter to the hot
conductor or on the hot side of the
electrical outlet.
3.
If AC voltage is present, the detector light
will illuminate.
NOTE
: The conductors in electrical cord sets are
often twisted. For best results, rub the meter tip
along the length of the cord to assure placing
the tip in close proximity to the live conductor.
NOTE 2
: The detector is designed with high sensitivity. Static
electricity or other sources of energy may randomly trip the sensor. This
is normal operation.
continued...
Compact Multimeter
NCV
R5099
AUTO
nm FVA Mk
AC
DC
Hz %
Ω
H
SELECT
HOLD
Hz %
Compact Multimeter
NCV
R5099
SELEC
T
HOLD
Hz %
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
