11
Setup Mode
1. Press and hold the
SET
button for 2 seconds to enter Setup Mode.
2. Press the
SET
button continuously to scroll through the
following parameters.
Parameter
Description
Sd F
Format the SD memory card
dAtE
Set the time and date
SP-t
Set the data logging sampling rate
PoFF
Enable or disable the auto-power off function
bEEP
Turn the beeper on or off
dEC
Set the decimal format (USA (20.00) or European (20,00))
t-CF
Select the temperature unit of measure (°C or °F)
PEr C
Set Conductivity temperature compensation factor
ESC
Exit Setup mode
3. Once the appropriate parameter has been selected, follow the
instructions below.
Formatting the SD Card (Sd F)
Follow steps 1 through 4 when "Sd F" appears on the LCD.
1.
Press the and buttons to select "YES" to format the card. Select
"nO" to abort.
2. Press the
ENTER
button to confirm selection.
3. Press the
ENTER
button again to re-confirm.
4. The meter will format the SD card and automatically return to the
Setup menu when formatting is complete.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
