11
Formatting the SD Card (Sd F)
Follow steps 1 through 4 when "Sd F" appears on the LCD.
1.
Press the and buttons to select "YES" to format the card. Select
"NO" to abort.
2. Press the
ENTER
button to confirm selection.
3. Press the
ENTER
button again to re-confirm.
4. The meter will format the SD card and automatically return to the
Setup menu when formatting is complete.
Note:
At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation. It is recommended that new SD cards
should be formatted prior to first use. If the formatting process fails or if
no card is inserted, the meter will display:
Setting the Time and Date (dAtE)
Follow steps 1 through 4 when "dAtE" appears on the LCD.
1. Press the and buttons to adjust the year as indicated by "YY."
2. Press the
ENTER
button to confirm selection.
3. Repeat steps 1 and 2 for month, day, hour, minute and seconds as
indicated by (mm/dd/h/m/s).
4. Press the
SET
button to save the time stamp and jump to
next parameter.
Note
: At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation. The internal clock will keep accurate time
when the meter is powered off. When new batteries are installed the clock
will have to be reset.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
