13
Audible Alarm Setting
Press the
SET
button five times and the audible alarm indicator will
appear on the display. Press the
UP
or
DOWN
buttons to turn the audible
alarm On/Off. The instrument will exit the setup after 10 seconds of inactivity
or if the trigger is pulled at any time.
Trigger Lock Setup
Press the
SET
button six times and the temperature measurement trigger
lock indicator will appear on the display. Press the
UP
or
DOWN
buttons to turn the trigger lock setup on/off. When the temperature
measurement trigger lock is turned on, press the
button to enter the
time stamp function and the hour field will flash. Press the
UP
or
DOWN
buttons to adjust the hour values. Press the
button again to switch to
the minutes field. To adjust, press the
UP
or
DOWN
buttons. Press the
a third time to confirm the entered time stamp. The instrument will exit the
setup after 10 seconds of inactivity or if the trigger is pulled at any time.
Turning High and Low Alarms ON/OFF
Press the
HI/LO
button to enable or disable the set alarms. To set alarms
refer to
Setting the High Temperature Alarm
or
Setting the Low Temperature
Alarm
. When the high alarm limit is turned on as indicated by
HI
on the
display, the red LED and "HI" indicator will flash when the set temperature
is exceeded. If the audible alarm function has been turned on, the meter will
also emit a beeping sound.
When the low alarm limit is turned on as indicated by
LO
on the display,
the blue LED and "LO" indicator will flash when the measured value is
below the set alarm. If the audible alarm function has been turned on, the
meter will also emit a beeping sound.
continued...
www.
.com
1.800.561.8187
