48
PowerMast by ReechCraft
INSP MAINTENANCE
SECTION
7
DAILY INSPECTION AND MAINTENANCE LOG (2 OF 2)
Component
OK Inspection/Action
Gearbox
Inspect the input shaft for wear or damage. If the hex is
rounded or damaged in any way, replace immediately.
Cam Lever Lock
Inspect the cam lever lock for any damage or excessive
wear. Ensure the torsion spring returns the cam lever
lock to the rest position freely and quickly. Inspect to
make sure that the bolts are tight and securing the cam
lever lock assembly to the climbing unit. While raising
the climbing unit, listen for an audible ratcheting pattern.
Pattern should be uniform both in volume and frequency.
Overspeed Brake
Ensure the overspeed brake is securely fastened to the
climbing unit with the bolts.
Drill Bracket
Inspect the drill bracket for any damage or misshapen
parts. Check that the bolts are securely fastening the drill
bracket to the climbing unit. Fasten the drill to the
gearbox using the drill bracket. Be sure the drill assembly
with the nut driver freely moves on to the hex input shaft
of the gearbox and engages fully. Secure the drill to the
drill bracket by tightening the wing nut.
Platform Support
Inspect all platform supports for any loose connections
or damaged components. Ensure the supports are
connected securely to the climbing unit, inspecting the
bolt connections and locking pins that secure them to the
climbing unit. Be sure all hardware used for adjustment is
present and functioning properly.
Masts
Inspect the mast for damage and straightness. Discard
and replace as necessary. Check for any missing screws
on the track and replace. Be sure all hardware is present,
secure, and fastens properly. Inspect the top stop of the
mast to ensure it functions properly.
Ties
Inspect the entire tie for any loose connections or
misshapen, broken, or damaged parts. Discard and
replace parts as necessary.
Work Platform
Ensure that the guardrails are in place and functioning
properly.
Drills
Check the cords and the nut driver. Be sure that the
nut driver is securely fastened. Discard or repair any
damaged electrical cords.
Cords/Powerboards
Check for any damage. Discard or repair immediately.