Reece Milli EXO WALL BASIN SET 4 Quick Start Manual Download Page 3

Page: 3 / 3

SECURE -FIT HANDLE

O-RING

HANDLE FITTING

HANDLE ORIENTATION

1. Separate parts from the handle as shown in

the illustration to the right.

2. Turn the ceramic cartridge to the off position.

3. Screw the Flange with O-ring onto the

cartridge lock nut until flush against the

finished wall.

4. Place the handle locking screw onto the

spindle, slotted side toward the wall.

5. Place the o-ring onto the retainer if not

already done so, then screw all the way

onto the spindle.

6. Place the spline adaptor onto the spindle

and against the retainer.

EXO WALL BASIN SET 4*

Summary of Contents for Milli EXO WALL BASIN SET 4

Page 1: ...e of soapy water or approved cleaners This product should not be cleaned with abrasive materials Damage caused by any improper treatment is not covered by the product warranty refer to Warranty Condit...

Page 2: ...WRENCHING FLATS FACTORY POSITIONED SEAL Important Do not move remove the factory set seal prior to installation Place each Ceramic cartridge with the factory set seal into the appropriate breech body...

Page 3: ...position 3 Screw the Flange with O ring onto the cartridge lock nut until flush against the finished wall 4 Place the handle locking screw onto the spindle slotted side toward the wall 5 Place the o r...