Reebok JET300+, User Manual

Page: 14 / 62

1 4.
J E T
3 0 0
+
U s e r M a n u a l
HANDLEBAR CONTROLS
SPEED+/ -
Increase/ decrease speed during workout
/ -
Increase/ Decrease incline during workout
PULSE GRIPS
There are pulse sensors located on both handlebars, in order to monitor the users pulse rate these can
be held in order for the reading to be given. The pulse monitor is a guide for reference only and not for
medical use or monitoring.
NORMAL MODE
1. From Standby press START to begin manual mode immediately
2. Treadmill speed and incline can be manually adjusted by using the SPEED +/- or I/- buttons at
any time during a workout
3. Press STOP/PAUSE button to pause or stop the workout.
4. Take out the SAFETY KEY to stop the working of the motor, or press STOP two times.
LUBRICATION REMIND FUNCTION
When the machine has completed 300km (188miles), the console will beep for every 10 seconds, and TIME
window will show OIL. This means that your treadmill needs to be lubricated with oil (this should be
completed every 6 weeks). To reset the console, hold STOP button for 3 seconds, the console will now
beep and reset.
COMPUTER FUNCTIONS
APPS
Built-in applications. Note: Wi-Fi must be connected before using other apps.
MUSIC
Play music stored on USB.
MOVIE
Play videos stored on USB.
SETTINGS
Set Wi-Fi, language and backlight.
VIRTUAL ACTIVE
Select from 3 scenic settings to simulate reality.
HRC
Select grade, age, target time and target heart rate. (To use this function, you must hold onto pulse sensors
for HR reading.)