Reebok Ine GT50, Assembly Manual

Page: 12 / 13

CONSOLE GUIDE
U01-U03 User defined programs
Within these programs the user can define the speed and incline for a personal workout.
1. From standby screen press PROGRAM button until U01, U02 or U03 is displayed.
2.
P ress MODE to enter the first segment of the program.
3. Press SPEED +/- to adjust the speed and I/- to adjust incline for this segment and press MODE
to continue.
4. Repeat above for all 20 segments of the program.
5.
Once the data is entered for all segments press START to begin.
When inputted the program will be saved within the selected user number (U01, U02 or U03).
Body fat function
1.
P ress PROGRAM button until Body Fat Function is displayed.
2. P ress MODE to Enter Body Fat Function.
3. T he SPEED/PROGRAM window will display the preset program (F1-F5).
4. P ress mode to select the required program.
5. The PULSE/INCLINE window will display the program parameters, press SPEED + or – to change this
and press MODE to confirm.
6. F1 – SEX SET will be displayed. Press I/- to switch between 1 (male) and 2 (female). Press MODE
to confirm.
7.
F2 – age will be displayed. Press I/- to adjust (preset is 25 years). Press MODE to confirm.
8. F3 – Height will be displayed. Press I/- to adjust (preset is 170cm). Press mode to confirm.
9. F4 – Weight will be displayed. Press I/- to adjust (preset is 70kg). Press MODE to confirm.
10. F5 will be displayed. At this stage the user information has been stored. Place both hands on the pulse
sensors for approximately 8 seconds. The test results will then be displayed as below:
1 9 or below U nderweight
2 0-25 Normal Weight
2 5-29 O verweight
3 0 or above O bese
Note: All readings given are a guideline only and not to be used as a medical device.
HRC – Heart rate control
(Optional, only applicable to Treadmills with HRC and chest belt).
Note: The speed and incline levels can be adjusted manually during this program but they will alter
automatically to sustain workout. These cannot be changed manually during the first 60 seconds.
1.
Press PROGRAM until HRC1, HRC2 or HRC3 is displayed.
2. P ress MODE to input user personal data (HRC will appear in SPEED window).
3. U sers age will be displayed (preset is 30). Press I/- to change and Press MODE to confirm.
4. A recommended target heart rate will be displayed. To change this press I/- and press MODE
to confirm.
5. The TIME window will show a preset time of 10.00 minutes. Press I/- to change this and press
MODE to confirm.
6. P ress START to begin.
Note:
The speed will be adjusted automatically during the program to reach the target heart rate.
If the maximum speed is reached before the target heart rate the incline will be adjusted by 1 level to
increase this further.
If the target heart rate is reached the speed and incline will remain constant.
MPH to KPH conversion
The Speed and distance can be set to operate in MPH or KPH.
To switch between these:
1. Remove the SAFETY KEY, the computer will display”SAFETY KEY TAKE OFF”.
2. Press and hold PROGRAM and MODE buttons together for 3 seconds.
3. The console will change from MPH to KPH automatically.
9.REEBOKFITNESSEQUIPMENT.COM