Redyon RY-403, Manual

Page: 18 / 28

3
Touch on the main menu to enter radio mode.
Touch icon to exit the radio.
Radio Operations
1. Enter / Exit
2. Band Selecting
3. Manual Tuning
4. Tuning
Touch to switch the radio band among FM1,
FM2, FM3, AM1, AM2.
Touch , there is a cursor will blink on the
screen, and then touch the frequency location, this
station will be stored.
Short press the / key on to move the radio
frequency number up or down step by step.
Long press the / key more than 2 seconds
to seek and play the previous or next available
station.
Slide left or right, or touch the frequency point
indicator plate, you can set the corresponding
frequency point.
Touch on the UI to enter automatic tuning,
and radio stations with strong signal will be stored
automatically.Touch again to stop tuning, and play
the current station.
The unit has 5 bands, such as FM1, FM2, Fm3, AM1,
and AM2. Each band can store 6 stations, hence the
unit can store 18 stations in FM bands and 12
stations in AM bands.
5. Automatic Tuning
6. Local/Distant Reception
Touch on the UI to active local or distant
reception. White color means on and grey color
means off.
7. Stereo on/off
Touch icon, on the stereo when the logo lighted
and off when the logo is gray.
8. Balance sound on/off
Touch icon, on the stereo when the logo lighted
and off when the logo is gray.
3. Start to pair all the keys in the same way. Afer all
keys are defined, exit the setting menu, and the
definitions will be stored.
SWC Operations
Steering wheel control setting as following (the
function maybe not available for different vehicles)
1. Touch [ ] to switch to SWC mode.
2. Enter steering wheel control setting.
If you need to redefine, press [ ], and operate
according to the indication, shown as below:.