All-In-One Energy Storage System
Quick Installation Guide
www.redxenergy.com.au
RX - 2505AC
Safety Statement
Danger
Warning
Warning
Notice
This document is subject to change from time to time due to product upgrades or other reasons.
This document is not a substitute for the user manual or safety instructions.
Please read the user manual and related standards before undertaking any operation / commissioning. Please
take time to access http://www.redxenergy.com.au or scan the QR code for the latest quick installation guide.
The installation must be completed by well trained, qualified professional technicians. Technicians
must be familiar with safety specifications of electrical systems.
Failure to comply with any of the above requirements may result in injury to personnel or damage
to equipment.
Prior to commencement, check whether the goods match the packing list, if there is any damage to
any items or components missing, please contact the Distributor / Dealer or Redx.
The power cables must be intact and well insulated. Please use insulating gloves and wear personal
protective equipment at all times when installing this Product.
All safety labels, warning labels, and nameplates must be clear and visible and cannot be
removed or modified.
Burn hazard！
Do not touch the inverter module for maintenance immediately after long time operation.
The country settings and protection parameters must be set by professional technician based
on local power grid standards.
Incorrect country settings may affect the operation of the unit adversely and may result in failure
to meet the local standard.
Warning Label
Disconnect all external power
supplies before maintainace.
High Voltage！
Only professional and qualified technicians
are allowed to install and operate
Hot surfaces！
Read all instructions before
operation.
Wait for 5 minutes before touching the internal conductive components after system
has been turned off and disconnected from grid.
5min
Redx shall not be liable for any loss of life or damage caused by failure to comply with the
requirements of this document and user manual.
Shock hazard！
Exposure to sunlight and the elements is not recommended
All electrical connections must be completed by professional technicians only.
All electrical connections must meet local and national electrical standards.
Only connect the system to the grid with local authority approval .
Warranty will be void if the cover is removed. Improper opening of the unit may also result in
serious electrical shock or injury to personnel.