Installation instruction for a
wall-mounted heater
2. Fix the 2 hooks onto the wall with expansion screws provided in the accessory bag of the
product. Distance is shown in Figure 1-3. When the installation position is determined, make
a mark first. Drill 4 holes on the wall as shown in Figure 1-4.
F
ø 10 mm
E
Figure 1-4
Figure 1-3
Distance marked above corresponds to that of each product as shown in the table:
Model
Distance E
Distance F
ETG500A
693
360MM
Hang the host machine of heater over the hook fixed on the wall through hook cover on the
back of the heater. See Figure 1-2. Then screw down the set screws and fix the product and
the hook with the 4 set screws. See Figure 1-5.
Summary of Contents for ETG500A
Page 15: ......
