Redwood Panel Heater Dimensions
Model
Width (mm)
Height (mm)
Depth (mm)
Area size (m
2
)
CA900FE
554 mm
510 mm
60 mm
Up to 12 m
2
CA180FE
850 mm
510 mm
60 mm
Up to 25 m
2
CA240FE
1150 mm
510 mm
60 mm
Up to 35 m
2
Installation Method
1. Check the installation accessories according to the attached list.
2. Select the installation wall according to requirements of installation size.
3. It is highly recommended that you use a level to ensure the heater sits straight.
4. A cardboard template has been provided with the heater to guide the positioning of drill holes.
5. Mark your drill holes on the wall according to the template hole positions. The drill size
diameter is 8mm x length 40mm.
6. Remove the template off once the holes are drilled.
7. If required (No solid back fixing) put the plastic expansion screws provided into the holes
drilled on the wall.
8. Install the
U
-shaped brackets onto the wall with the ST5X40 tapping screws provided.
9. Align the loop hooks on the back of the heater with the U bracket on the wall and the
heater should now be in the fitted position.
10. Align the loop hooks to U brackets.
11. Screw the 2 X ST4X10 screws provided to the top of the U bracket to secure.
Plug into the power socket tightly or hardwire into the RCD, now the wall mount installation process is completed.
On the right-hand side of the heater, locate
a black colour power switch, please make sure it’s ON.
