INSTALLATION
When mounted at the recommended height of 2.3m (7’6”) there will be an area directly below the unit
extending to 4m (12 feet) where an intruder may not be detected.
When planning the location, remember that ALL P.I.R. detectors respond best when the intruder crosses
the zones. Intruders entering a zone from the end and then moving towards the detector may not be
detected for up to 30% of the distance compared to an intruder who crosses the zone.
Fix to a firm rigid surface such as brick or concrete using all four fixing holes and the foam rubber gasket.
ELECTRICAL CONNECTIONS
Fig. 5. Shows the connections for 12 volt D.C. operation
Fig 6 shows connections for 24vac operation
WARNING! DO NOT CONNECT 220/110V SUPPLY VOLTAGES TO
ANY TERMINAL OR PARTS.