-- 3G Wide Band Repeater (Model: PORP23W)
http:www.redutelco.com
© 2009 Redutelco | All rights reserved
9
User Manual
Step 7
: Power up the system and check for signal inside the building. If
needed, tune system by moving and or pointing the Donor and Coverage
antennas until get the most signal possible.
Step 8
: Secure all antennas and cables, securely mount the repeater and
clean up the installation.
6.3 Commissioning
Port
Usage
BTS
Connect to Donor antenna, Receive BTS signal source
MS
Connect to Service antenna, Retransmitted signal to target coverage area
Lo ATT
Set gain for uplink by switch PIN ON/OFF
Hi ATT
Set gain for downlink by switch PIN ON/OFF
LED
Indicator
Power
Light @ power supply on
RUN
Light @ work and Power supply switch on
DIP SWITCHES
There are downlink (BTS site to )DIP Switches (Hi ATT) and uplink DIP
Switches (Lo ATT) for single band.
ON- means Attenuation
OFF- means no attenuation.
