-- Wide Dual Band Repeater (Model: PODRP27CT)
http:www.redutelco.com
© 2009 Redutelco | All rights reserved
9
User Manual
6.2 Installation
Step 1
: Start by taking phone up to the roof or other location outside to find
where the signal is strongest.
Step 2
: Temporarily mount the Donor (outside) antenna in that location. It
may need to adjust and move the antenna later.
Step 3
: Run coaxial cable into the building to a convenient location where
you can also get standard 220VAC power for the repeater.
Step 4
: Place the repeater in that location and connect the coaxial cable to
the Donor Side of the repeater and the donor antenna.
Step 5
: Mount coverage (inside) antenna in a productive location. It may
need to adjust or move the antenna later.
Step 6
: Connect coaxial cable between the coverage antenna and the
repeater output port.
Step 7
: Power up the system and check for signal inside the building. If
needed, tune system by moving and or pointing the Donor and Coverage
antennas until get the most signal possible.
Step 8
: Secure all antennas and cables, securely mount the repeater and
clean up the installation.
6.3 Commissioning
Item Description
Usage
BTS
Connect to Donor antenna
Receive BTS signal source
MS
Connect to Service antenna
Retransmitted signal to target coverage area
