-- Wide Band Repeater (Model: PODRP20)
http:www.redutelco.com
© 2009 Redutelco | All rights reserved
10
User Manual
-
You can switch attenuation value by using repeater side switch, If you want
to set attenuation 18, you push switch16 and switch 2 on.
-
And set UL ATT to limited the interference to BTS in uplink direction.
)
The repeater work in indoor, the indoor condition should meet environment
requirement, such as temperature, waterproof, installation space and
interference source ;
)
In order to receive right BTS signal, the antenna be directly toward to
visual BTS.
)
RF connectors should be link tighten;
)
Use mobile signal bars to check coverage effect on site.
)
For dual band repeater, if one band signal is not well, you can change the
donor antenna direction and check the change until it reach good
coverage.
)
For 850/1900 dual band repeater, the donor antenna direction must be
adjustment angle by angle, so the dual band input power require good
signal at the same time , then 850 and 1900 can work with maximum
coverage area and distance.
