10
MIDI
Duality, despite the full tube audio signal path, is equipped with digital memory which
can make saving combinations (preset) of functions inside the amp.
Duality is shipped with presetted midi channel #1. You can’t change midi channel on
the fly after bought it, but you can ask for a different midi channel at order time.
All the functions are recallable on the fly via midi CC. This is the full CC list:
•
Channel selection: CC #100
•
Vintage / Modern mode: CC #101
•
Lead boost: CC#102
•
Master 1 / Master 2: CC#103
•
Loop effects on /off: CC#104
All the CC are also be changed for a custom numbers, but only at order time.
SAVING A PRESET
Saving a preset is quite easy with Duality, it takes only few steps:
•
Choose the desired combination of functions (channel, boost, master, etc);
•
Keep pressed the “STORE” button for three seconds on rear panel, until
corresponding led turn on, than release it;
•
By using a MIDI devices able to send Program Change, send the desired PC you
want to memorize this particular combination;
•
Store led will blink couple time for confirmation;
•
You preset is now created.
You can save and re-save a preset infinite time. With this procedure you can use
different midi pedalbords or interface for recall preset without losing data, because all
presets are stored inside the amp. You only need to send the exact PC and it will recall
the same combination of functions every time forever.
You can exit saving routin anytime buy pressing “store switch”.