3
INTRODUCTION
Double Stereo Line Mixer is a line level professional device for parallel processing, with a fixed mix of
50/50 (dry/wet).
Thought as the ultimate and most compact solution in the business to mix up to two stereo returns
with incoming dry signal into a single stereo output.
To avoid any ground loop issue, sends and returns are transformer isolated.
The whole unit can operate at n4db line level signal.
POWER SUPPLY
Double Stereo Line Mixer must operate ONLY at 9 volte negative center @100mA. Any other voltage
could seriously damage the unit. His internal charge pump guarantees the optimal headroom. Do not
try to apply 12 or more volts in the aim to increase the headroom, this will 100% break down the unit.
!! WARNING !!
This is a line mixer with an internal dedicated DRY PATH. This mean you MUST set the mix of your
external effects to 100% wet, or where you can, to turn on KILL DRY.
The goal with this mixer is to preserve your dry tone and let the mixer take care of it, so don’t let any
portion of dry signal passing thru your external effects.
Summary of Contents for DOUBLE STEREO LINE MIXER
Page 12: ...12 Revision 1 0 September 2019...
