version number:
1.1.1.140508_PRO
Redsail Tech Co., Ltd
www.hflaser.com
28
Adjust the carriage arm to the position where you want your cutting to
start by using the Left and Right Arrow Keys.
Now press the OK button to tell the cutter that this is the location where
you would like the cut to begin.
Then operating your cutting design in the software to output, then
machine will start working.
When choosing a starting location for your design, remember that the
process will start in the bottom right area of the design. Please leave
enough room to the left of and behind the starting location to finish your
cut.
If you would like to make other adjustments to the pressure, speed, or
other settings you can do so now. If you are setting up for your first cut
with the machine then the default values should be a good starting point.
If you make any adjustments to your cutter, make sure that you return to
the main screen before you attempt to cut. If you are unsure how to do
this, refer to the Control Panel section of the manual on page 10.