Edition: V2.0 Date: 2012-1-11
Setting 3G Router
the router support 3G, Static IP, Dynamic IP, PPPoE, click “Basic Settings” on the left side
of WEB page, so you should first choose Router’s operating mode, the default mode is
“3G dialup”.
1. 3G Dial-UP
The default mode for the Router is 3G Dial-up. It already integrates many ISP parameters
over the world, and customers can choose the ones they want accroding to 3G Modems,
there is different parameters in different country.
For the foreigners, if a 3G Modem is not compatible with our Router, we can realize it from
remote online control, to make your 3G modems comply our router.
Return to “Status > Running Status”, check “3G Dialup”
says “connected
”,
if it’s connected,
you should be able to access Internet via 3G. Other cases:
If 3G Dialup says “disconnect”
,
it
means no 3G connection, maybe your 3G Modem is not
attached to the router, you can check the Modem’s VID/PID in 3G Modem(VID/PID), if the
VID/PID is Unrecognized, either the router’s USB port is bad or the 3G Modem is bad.
If “3G Dialup” says “connecting, please wait…”,
it means that the router is dialing now,
please wait for a moment, after 20 seconds, refresh the page until “3G Dialup” says
“connected”, if the status “connecting, please wait…” has shown for a long time, please
check as follows:
