manualshive.com logo in svg

RedPlate RedLine 50, Operation Manual, Page: 1 / 4

Share
Download
RedPlate RedLine 50 Operation Manual Download Page 1

RedPlate RedLine Operations Guide 

1 

RedLine 50/100 

Operations Manual 

Welcome to the RedPlate Family, thank you for your purchase of a RedPlate RedLine 
amplifier. Please take a moment and review this manual for an understanding of all the 
available features (or just put all the knobs at noon and play). 
This Manual applies to RedLine models produced after 11/1/2015.  

Signal Path Block Diagram: 

FRONT PANEL: 

The RedLine 

is designed to imitate (and surpass) all of the “classic” British style guitar amp 

preamps by producing a full range of tones with plenty of character and absolute control of the 
overall volume.  

Summary of Contents for RedLine 50

Page 1: ...nual for an understanding of all the available features or just put all the knobs at noon and play This Manual applies to RedLine models produced after 11 1 2015 Signal Path Block Diagram FRONT PANEL The RedLine is designed to imitate and surpass all of the classic British style guitar amp preamps by producing a full range of tones with plenty of character and absolute control of the overall volum...

Page 2: ...EAR PANEL SECTION SEND and RETURN Jacks The send jack connects to the input of an external effects device and the return jack connects to the output of an external effects device The return jack interrupts the signal path so the external effects unit must mix the wet and dry signals Footswitch Jack This is a standard for footswitch connection Impedance Selector Ω Set this to the total impedance of...

Page 3: ...ndby switch upwards to the Operate position 4 POWER OFF Toggle the main power switch downward there is no need to go into standby first although it will not hurt anything MAINTENANCE SECTION Your RedLine amp has been designed for years of trouble free operation The vacuum tubes will need to be replaced over time We recommend new output tubes every 160 240 hours and new preamp tubes every 320 480 h...

Page 4: ... the meter at chassis ground 6 Use a small flat blade screwdriver to adjust the bias pot for the bias number as stated on the rear panel 5 MV The reading is the sum of the idle current for all EL 34 tubes 7 Recheck the reading after 10 minutes of operation and again after a week or two of operation RedPlateAmps Warranty At RedPlateAmps we pride ourselves making products that are built to last The ...

Reviews:

No comments