2
Getting started
Insert the batteries
The
redpipe
works with three 1,5 V alkaline (AA, Mignon, LR6, AM3, MN1500) batteries or
rechargeable 1,2 V NiMH batteries.
If the batteries are getting low the the red LED display starts to blink.
The battery compartment is accessible by removing the lid. Just use a coin. The positive pole of the
batteries has to be on top.
Before having an important gig –always change the batteries before!
Connecting headphones
Connect the headphones to the 3,5 mm phonesjack . It is possible to connect all standard headphones as used for example
with portable disc players. Always use a stereo plug as mono plugs cause a short circuit which may damage the
instrument.
Connecting PA
LINE OUT,
this audio jack (6,3 mm) can be connected to the line in of an amplifier (line in of an amplifier, active
speakers or a mixer). Use mono plugs, because stero plugs just use one channel. Some amplifiers generate glitches. In
such a case use radio transmission,
a DI Box, or ground the amplifier.
Customizing of the chanter position
The chanter is adjustable. Hold it with your left hand and turn the chanter with your right hand.
Please do this absolutely carefully, otherwise you risk to damage the chanter totally.
