Redpine Signals, Inc. Proprietary and Confidential
Page 17
User Manual
Version 1.2.1
Performance Test mode.
Default Value
0
Input Parameters
Base Interface (string like rpine0)
Integer value mapped as follows:
4- PIFA Antenna
Output Parameter
None
Reset Required
No
Usage
# ./onebox_util<base_interface>ant_type<
antenna_type>
Example
The command below sets the Antenna type
to Fractus Antenna for Wi-Fi:
# ./onebox_util rpine0 ant_type 4
Table 6: Command to Program Antenna Type for Wi-Fi
4.2 Commands to Program Transmit Power
4.2.1 Command to Program Transmit Power for Wi-Fi
Description
This command is used to program the
transmit power of the module for Wi-Fi. If
the value of transmit power exceeds the
maximum allowed power supported by the
channel specified by the regulatory domain,
then the minimum of the two values will be
used.
Default Value
-
Input Parameters
VAP Name (string like wifi0, wifi1, etc.)
Integer value in dBm
Output Parameter
None
Reset Required
No.
Usage
#
iwconfig<vap_name>txpower<val_in_dBm
>
Example
The command below sets the Wi-Fi
transmit power to 15dBm:
