5
REDPATH BEAST GLASSHOUSE BASE DIMENSIONS
(Materials not supplied)
Base material may be: Timber, Brick, Block, or Concrete
(Dimensions shown are to the exterior edges)
The dimensions given below are for the base & ground anchoring system of your Glasshouse. You will need to supply the materials
& construct these using Concrete, Brick or Timber. Ensure that dimensions A & B are not exceeded! as these are precise outside
measurements enabling the aluminum base cill of the glasshouse (supplied) to overhang the edges of your base. Also ensure that
the base is square by measuring across the corners (C) in both directions. Only when this measurement is equal is the base square!
Check the level using a builder’s spirit level – in directions (A), (B) & (C) The building & its glass cladding relies on the buildings base
being level in all directions. The height of the base is typically up to 150mm above ground level, with a portion of the base being
below ground level. If using Timber for the base, the base will need to be secured to the ground with pegs spaced at a width & depth
to suit your chosen sites wind exposure & ground conditions.
HELPFUL HINTS & ADVICE
Please take your time and be sure to read all instructions carefully before assembling. The glasshouse structure does often require
at minimum an “experienced DIY” type person or a semi-skilled builder to assemble.
Locate the glasshouse in a sheltered or semi-sheltered position. Glass is a fragile product and strong winds, or flying debris could
potentially damage the glass sheeting. Secure the roof vents in a closed position, close doors & windows if very windy. A shelter
belt should be considered to protect the glasshouse and plants within in windy locations.
Do not assemble the frame or attempt to glaze in windy, or damp conditions
The glasshouse frame must be anchored to a permanent foundation / base. This will not only help secure it against strong winds,
but will help prevent breakage of the glass via ground movement. Materials for the base are optional & are not supplied as part of
this kitset.
When building your own timber/brick/concrete foundations/base ensure that they are level and square and built to the correct
outside measurements otherwise your frame will not be correct and the glass will not fit.
MODEL: Nominal frame size
A (actual base size width)
B (actual base size length)
C (actual diagonal – check)
BEAST 3.2m x 6.3m
3195mm
6284mm
7050mm
Note: Please check with your local council whether a building permit is
required for your glasshouse before construction commences
