12
tion will go out. To turn the appliance into the standby mode
manually, press “Start/Cancel”.
III. CLEANING AND MAINTENANCE
Before cleaning please make sure the appliance is unplugged and
has cooled down.
DO NOT wash the appliance under running water, immerse into
water or wash in dishwasher.
DO NOT use abrasives and chemically aggressive substances,
sponges with hard coating when cleaning the appliance.
Removable parts under running warm water after each use. Soft
detergent can be used. Clean the housing and metal plate for
reheating when required.
During operation, depending on the composition of usable water,
oxide spots and scale can appear on the heating element and
inner walls of the appliance. To remove it use special nonabrasive
cleansers for scale cleaning and removal from kitchen appli-
ances.
Storage and transportation
Before repeated operation or storage completely dry all parts of
the appliance. Store the assembled appliance in a dry, ventilated
place away from heating appliances and direct sunlight. During
transportation and storage, do not expose the device to me-
chanical stress, that may lead to damage of the device and/or
violation of the package integrity.
Keep the device package away from water and other liquids.
IV. BEFORE CONTACTING SERVICE
CENTRE
Problem
Possible cause
Solution
Pump makes noise Empty water tank
Fill the water tank
Water doesn’t flow
through
Empty water tank
Fill the water tank
The appliance wasn’t properly
cleaned after last use
Check the appliance cleaning
according to recommenda-
tions of the section “Cleaning
and maintenance”
The appliance is heavily clogged
You use coffee of too fine grin-
ding
We recommend you to use
ground coffee, intended for use
in the coffee-makers of this type
Coffee in the filter is too tamped
When adding coffee to the
filter do not apply too much
force
Water runs too fast
Coffee is too coarsely ground
Try to use fine ground coffee
There isn’t enough ground coffee
in the filter
Put more ground coffee into
the filter next time
Appliance doesn’t
function
Appliance is not plugged in
Plug in the appliance to the
working outlet
There is no power supply in the
electrical outlet
Plastic odour ap-
peared during opera-
tion
Appliance is new, the smell
comes out of protective cover
The smell will disappear after
a few uses
Synchronization at-
tempt failed
Bluetooth function on the mo-
bile device is disabled
Enable Bluetooth function on
the mobile device
Ready for Sky app on the mobile
device is deactivated
Run the Ready for Sky app on
the mobile device
Sync devices are located too far
Ensure devices are located
within 49 ft (15 meters) from
each other