4. Vacuuming a wine bottle by Wine Preserver
Notes: Not all bottles need to be vacuumed.
We recommend you to vacuum the bottle with wine
remaining if you want to keep fresh for 3-5days Operating Process
.
1).Place the wine bottle on a flat surface
2). Insert a wine stopper into the wine bottle (Fig.1).
3). Hold the wine stopper & wine bottle neck securely in one hand
and place the non-slip mouth of the Wine Preserver on the wine
stopper (Fig.2).
4). Keep the Wine Preserver as straight as possible and in line with
the wine bottle.
5). Push down on the wine stopper and press the power ‘on’ button
at the same time.
6). The Wine Preserver starts to work removing the air from the
bottle while making a clacking noise.
7). The clacking noise will become slower and stop suddenly after
20 seconds.
8). Do not release the power button until the unit stops.
9). Remove the Wine Preserver and replace on its charging base
until it is needed again.
Note
: The non-slip mouth may attach itself to the wine stopper. In
this case, hold the wine stopper and the neck of the bottle
securely in one hand and tilt the Wine Preserver away from the
wine stopper to break the suction. This should prevent air
from re-entering the bottle. If in doubt, repeat the above operating
process.
Fig.1
Fig.2