background image

     BEFORE USING YOUR KETTLE

If you are using the kettle for the first time, it is recommended 

that you should clean your kettle before use by boiling water at 

the Max capacity once and then rinsing with water twice. Wipe 

the surface with a damp cloth.

NOTE

: The max capacity of kettle is 1.5L.

     USING YOUR ELECTRIC KETTLE

1. Place the kettle on the flat surface.

2. To fill the kettle, remove it from the power base and remove the 

lid handle to open the lid, then fill the kettle with the desired 

amount of water and close the lid. The water level must be within 

the Min and the Max level. Too little water will cause the kettle to 

switch off before the water has boiled.

NOTE

: Do not fill the water over the maximum level, as water may 

spill out of the spout when boiling. Ensure that the lid is firmly in 

place before plugging in to the power outlet.

3. Position the kettle on the power base. 

4. Connect the plug into a power outlet. Press the power switch 

and its indicator will light up, and then the kettle will start to boil 

the water. The kettle will switch off automatically and the indica

-

tor will turn off once the water has boiled. If you need to reboil the 

water, you will need to wait 30 seconds before pressing the power 

switch again. You may shut off the power by directly lifting the 

kettle from the power base at any moment to stop the boiling 

process.

NOTE

: Ensure that switch is free of obstructions and the lid is 

firmly closed, the kettle will not turn off if the switch has beeen 

constrained or if the lid is open.

5. Lift the kettle from the power base and then pour the water. 

6. The kettle will not re-boil until the switch is pressed again. The 

kettle may be stored on the power base when not in use.

NOTE

: Always disconnect the power supply when not use.

Summary of Contents for EK009 NA







Reviews: