Locking holes
Cuttercase
Note:
If the locking screw is tightened up with
the holes out of alignment, the cuttercase
may be damaged.
4.
Fasten the cuttercase fastening screw
(long).
D. Front Handle
Extend the handle gap and fit it over the shaft
casing.
Adjust the position and fasten with three
screws and nuts provided with the products.
E. Stand
Install the stand onto the shaft casing approx.
1.2 inches away from the cuttercase. Fasten
the clamp uniformly.
i
Clamp
�
C::1
l
[ 5)
